Sun Microsystems 817-4054-15, Руководство по обслуживанию

Страница: 53 / 204

Chapter 3 System Access and Transportation 3-5
5. Loosen, but do not remove, the slide locking nuts at the rear of the system
(
FIGURE 3-4
).
FIGURE 3-4
Slide Locking Nut
3.2 Sliding the System Into the System
Cabinet
1. Make sure that the leveling feet are extended to the floor.
2. Make sure that the system cabinet stabilizer bar is extended and locked
(
FIGURE 3-2
).
3. From the front of the system, slide the system into the system cabinet.
4. Tighten the captive screws on the side handles (
FIGURE 3-3
).
5. Tighten the slide locking nuts at the rear of the system (
FIGURE 3-4
)
6. Retract the system cabinet stabilization bar (
FIGURE 3-2
).
Locking nut