Sun Microsystems 817-4054-15, Руководство по обслуживанию

Страница: 133 / 204

Chapter 8 Power Subsystem 8-9
6. Press down firmly to ensure the connector at the base of the board is firmly mated
with the receptacle on the baseplane.
FIGURE 8-7
Inserting the Power Distribution Board
7. Move the ejector lever to the horizontal position (
FIGURE 8-5
).
8. Re-engage the power supplies.
9. Install the IB_SSC assembly.
See Section 10.1.2, “Installing the IB_SSC Assembly” on page 10-7 .
10. Remove the wrist strap.
11. Slide the system into the system cabinet.
See Section 3.2, “Sliding the System Into the System Cabinet” on page 3-5 .
12. Retract the system cabinet stabilization bar.
13. Replace the four power input cables, AC0 through AC4 (
FIGURE 1-3
).
14. Power on the system.
See Section 4.1, “Powering On the System” on page 4-1 .
Connector
Receptacle