Sun Microsystems 817-4054-15, Руководство по обслуживанию

Страница: 180 / 204

13-6 Sun Fire E2900 System Service Manual • May 2006
6. Install or re-engage the assemblies and boards in the following order:
a. Seat the CPU/Memory boards and L2 Repeater boards.
See Section 9.2.2, “Installing a CPU/Memory Board” on page 9-8 and
Section 11.1.2, “Installing the L2 Repeater Board” on page 11-4 .
b. Install the power distribution board.
See Section 8.3.2, “Installing the Power Distribution Board” on page 8-8 .
c. From the right of the system, install the IB-SSC assembly.
d. Reseat all power supplies.
See Section 8.1.2, “Installing a Power Supply” on page 8-4 .
e. Install the main fan tray.
See Section 7.2.2, “Installing the Main Fan Tray” on page 7-10 .
f. At the rear of the system, reconnect the I/O cables and the power cables.
7. Remove the wrist strap.
8. Slide the system into the system cabinet and secure it.
See Section 3.1, “Sliding the System Out of the System Cabinet” on page 3-1 .
9. Retract the system cabinet stabilization bar.
10. Reconnect the four input power cables, AC0 through AC4 (
FIGURE 1-3
and
TABLE 1-1
).
11. Power on the system.
See Section 4.1, “Powering On the System” on page 4-1 .