manualshive.com logo in svg

Sulky Isobus X Series, Оригинальное руководство пользователя

Поделиться
Скачать
Sulky Isobus X Series Скачать руководство пользователя страница 2

2

Danger. When 
manipulating 
chemical products, 
wear adapted 
protection clothes.

Danger. Risk of escaping high-
pressure hydraulic fl uid which 
can penetrate in the body. 
Read the user manuel before 
maintenance of the hydraulic 
system.

Danger Moving 
parts,keep away.

Risk of damage 
to the machine 
Consult the 
instruction 
leafl et..

Danger of falling of 
the machine. Do not 
climb on the machine.

Risk of accident.

Operating tip.

Risk of damageto the 
machine.

Read carefully and 
follow the user manual 
and safety informations 
before starting up the 
machine.

Danger. Particules ejected by 
the machine at high speed. 
Keep away from the machine 
when the tractor engine is 
running.

 Safety  regulations

EN

Ⴠ

These symbols are used in these instructions every time recommendations are provided concerning your safety, the safety of others or the correct 
operation of the machine.

Ⴠ

These recommendations must be given to all users of the machine.

Do not 
discard the 
console.

Warning notices relating to safety are affi

  xed to your machine.Their aim is to 

contribute to your safety and to the safety of others.
Know their contents and check their location.
Review the safety notices as well as the instructions contained in this operating 
manual.
If any safety notices become illegible or lost they should be immediately 
replaced.

Содержание Isobus X Series












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды