stayer MULTI GAS CUTTER B Скачать руководство пользователя страница 34

ENGLISH

34

34

gb

This manual is consistent with the date of manufacture of 

your  machine,  you  will  find  information  on  the  technical 

data of the machine acquired manual check for updates 

of our machines on the website: 

www.grupostayer.com

1. 

APPLICATION

This appliance is designed for the following applications:

 

-

Brush cutter (when fitted with metal circular blade): 

The brush cutter is intended to cut weed and  

climbing plants. Do not use it for other purposes, 

never use it for cutting wood. Never cut objects with 

a diameter exceeding 13 mm.

 

-

Grass trimmer (when fitted with nylon line cutting 

head): The grass trimmer is intended for trimming 

grass. Do not use it for other purposes.

 

-

Hedge  trimmer  (when  fitted  with  reciprocating 

blade): 

The trimmer is intended to be used for trimming 

hedges and bushes with diameter not more than 24 mm. 

Do not use this appliance for other purpose than those 

described in this manual.

WARNING! Read this manual and general 

 

safety instructions carefully before using the 

appliance, for your own safety. Your tool 

should only be passed on together with these 

instructions.

2. 

2 DESCRIPTION (FIG. A)

Trimmer head

Top protecting cap

Gear box

Fixing plate

Cutting attachment guard.

Front drive shaft tube.

Lock pin.

Lock knob.

Connector.

10 

Barrier.

11 

Front handle.

12 

Engine switch.

13 

Throttle lock.

14 

Throttle trigger lockout.

15 

Auxiliary handle.

16 

Suspension ring.

17 

Output flange.

18 

Spark plug

19 

Engine.

20 

Starter handle.

21 

Fuel tank.

22 

Choke knob

23 

Primer bulb.

24 

Filter cover.

25 

Throttle trigger.

26 

Locking nut.

27 

Bottom Protecting cap.

28 

Bottom clamping plate.

29 

Metal blade.

30 

Top clamping plate.

31 

Blade cover.

32 

Cutting blade.

33 

Grease nozzle.

34 

Transmission.

35 

Locking lever.

36 

Grip.

37 

Gear box.

38 

Chain saw.

39 

Chain saw oil tank.

40 

Oil flow adjustment screw.

3. 

PACKAGE CONTENT LIST

 

- Remove all packing materials.

 

- Remove remaining packaging and transit supports (if 

existing).

 

- Check the completeness of the packing content

 

- Check the appliance, the power cord, the power plug 

and all accessories for transportation damages.

 

- Keep the packaging materials as far as possible till the 

end of the warranty period. Dispose it into your local 

waste disposal system afterwards.

WARNING: Packing materials are no toys! 

Children must not play with plastic bags! 

Danger of suffocation!

LONG REACH 3-en-1 combi: brush cutter, grass trimmer, 

hedge trimmer 33Cc

Safety blade cover.

Carrying belt.

Manual.

Spark plug wrench.

When parts are missing or damaged, please 

contact your dealer.

4. 

4 SYMBOLS

In this manual and/or on the machine the following 

symbols are used:

Read instructions carefully.

Denotes risk of personal injury or damage to the 

tool.

Wearing of protective shoes advised.

Wear safety glasses and ear protection

Wear gloves.

Never operate the machine in the rain or in damp 

or wet condition. Moisture is a shock hazard..

Warning! Flying objects

Содержание MULTI GAS CUTTER B





























































Отзывы: