102
[Notes]
If any of the status items in the table above are enabled,
the
printer transmits the status when this command is executed.
The printer automatically transmits the status whenever the
enabled status item changes. The disabled status items may
change, in this case, because each status transmission
represents the current status.
If all status items are disabled, the ASB function is also
disabled.
If the ASB is
enabled as a default, the printer transmits the
status when the printer data reception and transmission is
possible at the first time from when the printer is turned on.
The following four status bytes are transmitted without
confirming whether the host is ready to receive data. The four
status bytes must be consecutive, except for the XOFF code.
Since this command is executed after the data is
Содержание SP-T8
