119
FS – n
[Name] Turn underline mode on/off for Chinese characters
[Format] ASCII FS - n
Hex 1C 2D n
Decimal 28 45 n
[Range] 0 n 2, 48 n 50
[Description] Turns underline mode for Chinese characters
on or off, based on the following values
of n.
n Function
0, 48
Turns off underline mode for Chinese characters
1, 49
Turns on underline mode for Chinese characters
(1-dot thick)
2, 50
Turns on underline mode for Chinese characters
(2-dot thick)
[Notes]
Th
e printer can underline all characters (including right-
and
left-side character spacing), but cannot underline the space
set by
HT
and 90° clockwise-rotated characters.
After the underline mode for Chinese characters is turned
off by setting n to 0, underline printing is no longer performed,
but the previously specified underline thickness is not
changed. The default underline thickness is 1 dot.
The specified line thickness does not change even when
the character size changes.
Содержание SP-T8
