SPRT SP-T8, Руководство пользователя

Страница: 109 / 125

109
 If n is outside of the specified range, the printer stops
command processing and processes the following data as
normal data.
[Notes in standard mode]
 If d is outside of the specified range, the printer only feeds
paper and processes the following data as normal data.
 If the horizontal size exceeds prin ting area, the printer only
feeds the paper.
 This command feeds as much paper as is required to print
the bar code, regardless of the line spacing specified by
ESC 2 or ESC 3 .
 This command is enabled only when no data exists in the
print buffer. When data exists in the print buffer, the printer
processes the data following m as normal data.
 After printing bar code, this command sets the print
position to the beginning of the line.
 This command is not affected by print modes (emphasized,
double-strike, underline, character size, white/black reverse
printing, or 90
 rotated character, etc.), except for
upside-down printing mode.
[Notes in page mode]
 This command develops bar code data in the print buffer,
but does not print it. After processing bar code data, this
command moves the print position to the right side dot of the
bar code.
 If d is out of the specified range, this command is ignored.