63
vertical) motion unit. However, the value cannot be less than
the minimum horizontal movement amount, and it must be in
even units of the minimum horizontal movement amount.
In standard mode, the horizontal motion unit is used.
In
page mode, the horizontal or vertical motion unit differs
as follows, depending on the starting point of the printing
area:
When the starting position is set to the upper left or lower
①
right of the printable area using
ESC T
, the horizontal motion
unit ( x) is used.
When the starting position is set to the upper right or lower
②
left of the printable area using
ESC T
, the vertical motion unit
( y) is used.
[Reference]
ESC $
,
GS P
ESC a n
[Name] Select justification
[Format] ASCII ESC a n
Hex 1B 61 n
Decimal 27 97 n
[Range] 0
n
2, 48
n
50
[Description] Aligns all the data in one line to the specified
position, n selects the justification as follows:
Содержание SP-T8
