84
[Description]
This command is enabled only when processed at the
beginning of a line in standard mode.
This command is no effect in page mode.
When this command is received during macro definition,
the printer ends macro definition and begins performing this
command.
After the test print is finished, the printer resets itself
automatically. Therefore, the already-defined data before this
command is executed, such as an user defined characters,
downloaded bit image, and macro, becomes undefined, and
the receive buffer and print buffer are cleared, and each
setting returns to the default value. The printer also re-reads
the DIP switch settings.
The printer cuts the paper at the end of the test print.
The printer goes BUSY while this com
mand is executed.
GS
x y d1...d(x
y
8)
[Name] Define downloaded bit image
[Format] ASCII GS
x y d1...d(x
y
8)
Hex 1D 2A x y d1...d(x
y
8)
Содержание SP-T8
