SPRT SP-T8, Руководство пользователя

Страница: 36 / 125

36
Decimal 27 36 nL nH
[Range] 0  nL  255; 0  nH  255
[Description] Sets the distance from the beginning of the line
to the position at which subsequent characters
are to be printed.
 The distance from the beginning of the line to the
print position is [( nL + nH  256)  (vertical o r
horizontal motion unit)] inches.
[Notes]
 Settings outside the specified printable area are ignored.
 The horizontal and vertical motion unit are specified by GS
P .
 The GS P command can change the horizontal (and
vertical) motion unit. However, the value cannot be less than
the minimum horizontal movement amount, and it must be in
even units of the minimum horizontal movement amount.
 In standard mode, the horizontal motion unit ( x) is used.
 In page mode, horizontal or vertical motion unit differ s
depending on the starting position of the printable area as
follows:
When the starting position is set to the upper left or lower
①
right of the printable area using ESC T , the horizontal motion
unit ( x) is used.
When the starting position is set to t
②
he upper right or lower
left of the printable area using ESC T , the vertical motion unit
( y) is used.