14
while holding down the FEED button, the self-test begins.
The self-test prints the current printer status and settings.
The self-test automatically ends. The printer is ready to
receive data as soon as it completes the self-test.
3.2.3 Paper Feeding
When the printer works normally, hold down
【
FEED
】
button,
the paper feeding begins, and stops when hold down
【
FEED
】
button again.
3.2.4 Paper Tearing
After each receipts is finished printing, it needs to tear off the
paper along the tear bar. Please don’t use too much strength.
Otherwise the paper will be pulled out from the paper case.
3.2.5 Battery Using and Charging
充电接口
Charging Port
Содержание SP-T8
