Spectra nTier500, Руководство пользователя

Страница: 47 / 184

Installing the nTier500
September 2010
Spectra nTier500 Backup and Archive Appliance
47
3. Install the front cover.
ƒ
If the front cover does not have an operator panel:
a. While holding the keys in place, orient the cover so that the
chassis handles fit into the cavities on each side of the cover (see
Figure 22 on page 46 ).
b. Push in on both keys and turn them to the horizontal (locked)
position to secure the cover to the chassis.
ƒ
If the front cover does have an operator panel:
a. Hold the edges of the cover and orient it so that the alignment
tab fits straight into the top slot in the front of the chassis, as
shown in
Figure 23 .
b.
Gently press the cover onto the chassis so that it fits over the PC
card extending from the front of the chassis and the chassis
handles fit into the cavities on each side of the bezel. Make sure
that the PC card on the back of the cover engages the connector
on the front of the chassis.
c. Push in on each key and turn it to the horizontal (locked)
position to secure the cover to the chassis.
Figure 23 Attach the front cover.
Alignment tab
PC card
Connector for
operator panel
Caution
Be careful not to bump or bend the PC card extending from the front of the chassis.