132
Making Settings Using a Personal Computer
To make the settings:
When the slot into which the DMBK-R103 is inserted
is selected in Edit Mode on the SLOT STATUS page,
ORIGIN information and DESTINATION information
can be set for digital output status. Status information
other than these two are automatically generated in the
SIU-100/100T.
Proceed as follows to make setting(s).
1
Select MODE.
Click the [Thru] or the [Edit] radio buttons.
Thru: The status information included in the digital
input routed to the output is copied to the output
signals.
Edit: You can set ORIGIN information and
DESTINATION information. This information is
copied to the output signals.
Thru radio button
If Edit is selected, go to step 2.
If Thru is selected, go to step 3.
2
Enter the origin and destination in the ORIGIN and
DESTINATION columns using 4 characters,
respectively.
3
Click the [APPLY] button.
The settings are executed.
If you selected Edit in step 1: The information
entered in step 2 is displayed.
If you selected Thru in step 1: Information from
the digital signal selected as the input signal is
displayed.
To cancel the operation performed in steps
1 and 2
Click the [CANCEL] button instead of the
[APPLY] button.
DMBK-R109
To confirm:
You can confirm the status of each channel.
Select the desired channel in the CHANNEL SELECT
column.
The channel status is displayed in the INPUT STATUS
and OUTPUT STATUS column.
Click the desired channel
For detailed information on status, see “Status display for
the digital input” on page 118.
Edit radio button
