115
Note
When EXT-DI is selected and the DMBK-R109 MADI
board is selected as the reference signal, do not use
AUTO mode. The SIU-100/100T may not operate
correctly depending on the specification of the word
clock signal input to the MADI board.
About the video frequency AUTO mode
When EXT-VID is selected, if you specify AUTO, the
SIU-100/100T automatically detects the video
frequency and synchronizes with that frequency.
Design of the SYNC submenu
1
Setting status display mark
Indicates whether or not the settings on the SYNC
submenu are the ones currently set. If the settings are
changed, this mark disappears.
2
Sampling frequency
Displays and selects the sampling frequency.
3
Sync reference signal
Displays and selects the sync reference signal.
1
Setting status display mark
2
Sampling frequency
3
Sync reference signal
SYNC submenu operation
1
Enter the SYNC submenu by displaying it on the
LCD.
The current settings are displayed.
The * mark indicates that the settings are the
current ones.
When the settings are changed in steps 2 and 3,
this mark disappears to indicate that the settings
will be changed.
2
Move the cursor to the lower row and select the
synchronous reference signal using the +/– buttons.
The synchronous reference signal changes in the
following sequence: INTERNAL
y
EXT-DI
y
EXT-WORD
y
EXT VID.
To select EXT-DI:
Move the cursor to the right pushing the
b
button
and specify the source channel.
To select EXT-VID:
Move the cursor to the right by pushing the
b
button and specify the video frequency.
3
Move the cursor to the upper row and specify the
sampling frequency using the +/– buttons.
4
Push the ENTER button.
“?” appears to ask you to confirm whether or not
the settings are to be changed.
5
Push the ENTER button again to change the
settings.
When settings are completed, the ? mark changes
to a * mark.
To cancel the settings
Push the CANCEL button instead of the ENTER
button.
The SIU-100/100T returns to the mode used to
select a submenu from the SETUP menu.
