39
Content
Chapt
er 1 Us
e
r Guid
e
• IP Address
To set a static IP address, tap
IP Address
and the
Enter Address popup appears.
To set a new IP address, tap
CLEAR
, set the new IP
address by tapping the numbers on the
Keypad
, and
then tap
Accept
.
IP addresses “192.168.1.x” to “192.168.5.x” are
used internally by the system and cannot be used for
the S2S network.
Entering the IP addresses from the ENTER
ADDRESS popup uses the “dotted decimal” format
and must include the “dot(s)” as part of the entry.
• Subnet Mask
To set a static Subnet Mask, tap
Subnet Mask
and
the ENTER ADDRESS popup appears. Tap
CLEAR
, set the new IP address by tapping the
numbers on the
Keypad
, and then tap
Accept
.
• Gateway
To set a static Gateway, tap
Gateway
and the
ENTER ADDRESS popup appears. Tap
CLEAR
,
set the new IP address by tapping the numbers on the
Keypad
, and then tap
Accept
.
After completing the input, tap Save Settings as required.
PWI (Play While Ingest) Source
You can view a list of
source addresses for Play
While Ingest.
To access the PWI
SOURCE pane, tap
Menu
,
Content
, and
PWI Source
in
succession. The PWI
SOURCE pane appears
when you select
PWI
Source
.
In this pane, you can
register the names, IP
addresses, account
names, and passwords of
the library servers that
will serve as the ingest
sources during Play While Ingest.
To register a new source, enter the name and IP address of
the library server that will serve as the ingest source in
Name and IP Address on the left, and enter the name and
password of the account registered to the library server in
UserID and Password. The source will be registered in the
area on the right when you tap the
Add
button.
If you want to delete a registered source, select the source
you want to delete in the registered list on the right. The
selected source will be deleted when you tap the
Remove
button.
After registering and deleting sources, you can save the
settings by tapping
Save Settings
at the bottom right. Tap
Save Settings
when you are finished.
Only FTP servers using FileZilla/VSFTPd can be
registered as library servers. Up to 50 sources can be
registered. You can enter up 256 characters (alphanumeric
characters and symbols, excluding spaces and + signs) for
Name
. You can enter up to 50 characters (alphanumeric
characters, underscores, hyphens, and periods) each for
UserID
and
Password
.
Caution
Note
IP ADDRESS
Assignment
Current
IP address
Enter
CLEAR
(Clr)
Keypad
“dot”
Note
Tap PWI Source
Content Menu
Source to be Newly Registered
Registered Sources
