Sony Screen Management System страница 37 Скачать руководство пользователя | Manualshive

Страница: 37 / 81

background image

37

Content

Chapt

er 1 Us

e

r Guid

e

On the rear of the SRX-R320
projector, below the power switch and
RS-232C connector, there is a USB
port labeled INGESTPORT. You can
plug a USB 2.0 Drive into this
connector and it will appear as a folder
in the INGEST KDM list.

From the INGEST KDM pane you can
copy the KDM from its storage
location into the Media Block RAID
Storage. In addition, you can view the
details of the selected KDM.

A USB drive has a folder structure that may contain other
folders or a number of files. Once the USB drive is plugged
in to the Ingest Port, it will appear as a folder in the
INGEST KDM list. The target KDM appears as a file and
can be found in one of the folders on the USB drive.

Alternatively, the KDM file may be located in one of the
folders which have been defined using the SMS Controller
based on fixed locations. To locate the target KDM, tap

Scroll Up

or

Scroll Down

until you find the

desired top level folder and then tap the folder view its
contents. Again, Scroll Up or Scroll Down to locate the
target KDM, tap to select the

KDM

and then tap

Ingest

to

begin the ingest process. Since a KDM is usually quite
small, the ingest process should finish quickly. To Ingest
all KDM contained in a folder, select the target folder and
then tap

Ingest

. The Ingest process is queued and Ingest

proceeds in as a background process.

The folder hierarchy on the transfer media may be more
than one level deep. Continue to navigate folders until the
target KDM has been located.

View KDM Details

To view detail information for a specific KDM, locate the
specific KDM in the list. Tap to select the

KDM

and then

tap

Details

. The KDM DETAILS popup appears.

The KDM DETAILS popup contains information about
the selected KDM. In addition to the Title, the Start
Date (Time) and End Date (Time) showing the valid KDM
Date Range is shown. These dates are the first date and last
date the KDM can be used for decrypting its associated
Content (CPL). The Date and Time is shown in UTC
(GMT) as indicated by the designator “Z”. The Filename
for the selected KDM is also shown.

To close the KDM DETAILS popup, tap

Close

.

Cleanup (KDMs)

A role restricted function that allows an authorized user to
cleanup orphaned or expired KDMs. KDMs may be
orphaned when the associated DCP is moved to another
Screen Management System or if it is the practice of the
exhibitor to Ingest all KDMs into all available systems.
This function is invoked automatically, and does not
require manual operation under normal circumstances.

Note

Ingest Port

Selected KDM

Ingest

Details

Cleanup

KDM Date

Range

KDM Title

Close

KDM FIlename

«
...
35
36
37
38
39
...
»

Содержание Screen Management System


















































































Отзывы:

Нет отзывов

Похожие инструкции для Screen Management System

Бренд: Samsung Страницы: 20

Бренд: Samsung Страницы: 2

Бренд: RBH Sound Страницы: 12

Бренд: Zip Страницы: 16

Бренд: texet Страницы: 28

Бренд: Sabiana Страницы: 56

DTS-212 SPEAKER SYSTEM

Бренд: Altec Lansing Страницы: 8

ProMedia Ultra 2.0

Бренд: Klipsch Страницы: 7

Бренд: Medion Страницы: 308

Бренд: Onkyo Страницы: 24

Бренд: YA Страницы: 2

Бренд: Harman Kardon Страницы: 37

Бренд: Dometic Страницы: 24

W8LC - SCHEMATICS

Бренд: Martin Audio Страницы: 1

Бренд: JAMO Страницы: 9

Бренд: GE Страницы: 6

Бренд: GE Страницы: 8

Бренд: GE Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды