Sony NU-NM11B, Руководство по системной интеграции

Страница: 33 / 78

33
Step 4: Installing an IP Converter
d
Set the IP converter connection type (source/
destination)
Set the IP converter for connection to a source device or
destination device.
For details about configuration, see
“Setting the IP
converter connection type (source/destination)”
(page 36)
.
An IP converter operates in DHCP mode in its initialized
state. For operation, the setting must be changed to a static
IP address. Set to a static IP address as described in
“IP
addresses” (page 17) .
Settings according to the operation mode
Configure the settings according to the operation mode (safety priority/cost priority/uncompressed transmission priority)
determined in
“Determining the Operation Mode” (page 7) .
The following table shows the settings that vary in each operation mode.
Configuring other items
Configure the following items, as required.
Down-convert function
You can use the down-convert function on an IP converter
configured for connection with a destination device to
down-convert 4K video for output on an HD monitor. For
details about configuration, see
“Enabling/disabling the
down-convert function” (page 38) .
Setting the video interface
You can select the video interface on a DVI IP converter.
For details about configuration, see
“Setting the video
interface” (page 38) .
Basic IP Converter Configuration
Operations
Configure the various settings of an IP converter using
Network System Manager.
IP converter settings are broadly divided into two types:
NMI (Networked Media Interface) device common
settings and IP converter-specific settings.
You can configure settings on the following screens.
• NMI device common settings: [Edit Virtual Device]
screen
• IP converter-specific settings: [Detail setting] screen
Use the following procedure to display each screen.
1
Display the [Virtual Device List] screen.
See steps
1
to
3
in “Registering an IP converter in a
workgroup” (page 31) .
2
Select the IP converter you want to change in [Virtual
Device List], and click the [Edit] button.
The [Edit Virtual Device] screen appears.
Tip
Configuration item Operation mode
Safety priority Cost priority Uncompressed
transmission priority
Enabling/disabling the optical
fiber cable redundancy
function
(see page 37)
Set the redundancy function
on for all IP converters. Set the redundancy function
off for all IP converters. IP converters connected to a
4K source device:
Off
Other IP converters:
On
Enabling 4K uncompressed
transmission
(see page 37)
Setup not required. Setup not required. IP converters connected to a
4K source device:
Enable 4K uncompressed
transmission.
Other IP converters:
Setup not required.