manualshive.com logo in svg

Solare Datensysteme Solar-Log, Руководство по подключению компонентов, Страница: 337 / 506

Поделиться
Скачать
Solare Datensysteme Solar-Log Скачать руководство пользователя страница 337

337

 Solectria

Procedure

1.  Open the inverter according to the inverter‘s instructions.
2.  Connect the other inverters to each other in the same way.
3.  Terminate the last inverter according to the inverter instructions.
4.  Close the inverter.
5.  Set the communication address via the display according to the inverter‘s instructions. Recommendation: 

Continuous numbering starting with 1.  Address range 1 - 254.

Note

Check the baud rate for the inverter. The baud rate has to be set to 19200 with stop bits and without 
parity (19200-8N1). Follow the manufacturer’s instructions for setting the baud rate.

Содержание Solar-Log



























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов