Snap-On Zeus, Руководство пользователя

Страница: 151 / 235

Scope and Multimeter Operations Test Leads and Accessories
144
9.16.3 Channel 3 Lead
Figure 9-79
Blue Channel 3 lead
The non-shielded blue lead (
Figure 9-79
) is used for either Channel 3 or Digital
Meter minus (–). The lead color matches the color of socket 3 on the Scope Module,
as well as the color of trace 3 on the test screen.
9.16.4 Channel 4 Lead
Figure 9-80
Red Channel 4 lead
The non-shielded red lead (
Figure 9-80
) is used for either Channel 4 or Digital
Meter plus (+). The lead color matches the color of socket 4 on the Scope Module,
as well as the color of trace 4 on the test screen.
9.16.5 Alligator Clips and Probes
Insulated alligator clips and probes (pointed type) can be attached to the end of the
test leads. Each alligator clip is color matched with a test lead, and the probes are
available in red and black.
Figure 9-81
9.16.6 Low Amp Current Probe (optional)
The Low Amp Current Probe is used to measure AC or DC current up to 60A. This
probe includes two scales (0 to 20A) and (0 to 60A) that can be used to provide
accurate and reliable non-intrusive current measurement for components such as,
ignition coils, fuel injectors, fuel pumps, relays, and electric motors.
Figure 9-82
Low Amp Current Probe
9.16.7 Temperature Probe Adapter (optional)
The temperature probe adapter can be used to measure temperatures ranging from
–50° F to 1,800° F. Different probes are available for surface, fluid and air
temperature measurements.
Figure 9-83