Snap-On Zeus, Руководство пользователя

Страница: 116 / 235

Scope and Multimeter Operations Setup Menu (Preferences)
109
9.8.2 Trigger Setup Menu
See
Triggers on page 122
.‘
9.8.3 View Controls
Use the view controls to set display attributes.
z
To adjust view controls:
1. Select Setup from the Scope Multimeter toolbar.
The Scope Multimeter Preferences dialog box opens.
2. Select View to open a submenu.
3. Select an option from the submenu dialog box. Option details are explained
below.
Four options are available on the submenu:
–
Back —use to return to the Preferences dialog box, or select Exit to close the
dialog box and return to the scope.
–
Display —use to adjust what information displays and how it appears
–
Layout —use to set how many traces display and how they display on the
screen
–
Units —use to adjust time and voltage interval settings
Display Settings
Selecting Display from the View submenu opens the Display dialog box
(
Figure 9-12
).
Figure 9-12
Sample Display dialog box
The following options are available from the Display dialog box:
•
Show RPM —adds an engine speed field at the top of the screen (
Figure 9-13
).
Figure 9-13
Sample Show RPM selected
•
Show Digital KV —available only in ignition scope, displays digital kilovolt
readings, rather than waveforms, on the screen (
Figure 9-14
).
Figure 9-14
Sample Show Digital KV selected