ADAS Recalibration Report
ADAS Recalibration Report Form
219
18.1.1 Saving the Report (Typical Navigation)
1.
Connect the diagnostic tool to the vehicle and identify the vehicle.
NOTE
The information that is entered during vehicle identification is automatically
entered onto the report form (vehicle make, model, VIN, odometer, license
number, etc). The Shop Information that is associated with the diagnostic tool
is also entered on the form, see
information.
2.
From the System menu, select the applicable
ADAS (Driver Assistance)
system (Lane Departure Alert, Cruise Control Radar, Front Sensing Camera,
Front/Rear Camera Sensor, etc (system names vary by manufacturer)).
3.
Select the applicable
functional test
or adjustment option (Recognition
Camera Axis Adjust, Beam Axis Adjustment, Static Aiming, etc (test names
vary by manufacturer)).
4.
Follow and perform all the required setup instructions. Reference and setup
values are located in the OEM service information which is available
separately. If using the ADAS Recalibration System, setup values and
instructions are provided with the unit.
NOTE
Take screenshots of any setup and or results screens that may be needed for
reference later when filling out the form.
5.
Initiate the recalibration test when prompted.
6.
Once calibration is completed
Exit
the test.
7.
Select the
Back Arrow
twice to return to the System menu.
8.
From the upper toolbar, select
ADAS Report
). The ADAS Report
form is displayed (
).
Figure 18-2
Figure 18-3
9.
Select
Save
(
) to save the report within the diagnostic tool and
automatically upload it to the Snap-on Cloud.
NOTE
Selecting Print will not save the report.
Содержание Zeus
Страница 1: ...User Manual ZEEMS342A Rev F TM Start BC ...
