25
Section 2
Scanner Demonstration
2.1 Demonstration Modes
Two training (demonstration) modes are provided to help you to become familiar
with Scanner functions:
•
Scanner Demonstration
•
OBD Training
These training modes allow you to navigate through normal Scanner and OBD-II
Direct operations and menus, without connecting to a vehicle. Sample data and test
results are provided to help you learn the menus and basic operations.
This section provides examples for the Scanner Demonstration only.
IMPORTANT
Do not connect the compact scan module to a vehicle while using the
demonstration program.
Scanner Demonstration
The Scanner demonstration program allows you to navigate through many
functions of the Scanner, and displays vehicle data (PIDs) and trouble codes
(captured from an actual vehicle) to simulate what you might see on an actual
vehicle.
The following Scanner demonstrations are intended to be completed in sequence:
Demo Setup - Before you begin
Scanner Demo 1 - Vehicle Identification
Scanner Demo 2 - Scan for Engine Codes and View Code Specific Information
and PIDs using the Intelligent Diagnostics Demo
Scanner Demo 3 - View, Configure and Save Engine Data (PIDs)
Scanner Demo 4 - Perform a Functional Test
Scanner Demo 5 - Perform a Code Scan
Scanner Demo 6 - View Saved Scanner Codes, Data Files and Code Scan
Reports
z
Demo Setup - Before you begin
Before starting these demos, connect the AC power supply to the diagnostic tool,
and connect the compact scan module (CSM) to the diagnostic tool using the USB
cable. This ensures the diagnostic tool battery does not discharge, and supplies
power to the CSM allowing it to pair with the diagnostic tool.
IMPORTANT
Do not connect the compact scan module to a vehicle while using the
demonstration program.
z
Scanner Demo 1 - Vehicle Identification
The first process in communicating with any vehicle is identifying the vehicle. The
following walk-through will guide you though this process using the Scanner
demonstration mode.
1.
From the Home screen, select
Scanner
.
2.
Screen prompt displays “Connect your Scanner Module to get started.”. Select
Continue
, to proceed.
3.
The manufacturer (vehicle make) menu displays, select
Demonstration
from
the bottom of the list (scroll down).
4.
The demo menu displays four options:
–
2016 Chevrolet Tahoe North American Demo
–
2013 BMW 328xi North American Demo
–
2018 Toyota Camry North American Demo
–
OBD Training Mode
5.
Select 2016 Chevrolet Tahoe North American Demo.
The simulated Vehicle ID process starts.
6.
Select
No
, if asked if you want to scan a real vehicle.
7.
The vehicle confirmation screen displays, select
OK
. (Selecting OK loads the
specific vehicle database, in this instance it’s our demonstration database).
8.
A demo mode confirmation message displays, Select
Continue
.
Содержание Zeus
Страница 1: ...User Manual ZEEMS342A Rev F TM Start BC ...
