Snap-On Zeus Скачать руководство пользователя | Manualshive

Страница: 234 / 235

background image

227

Legal Information

Trademarks

Snap-on, ZEUS, SureTrack, ShopStream,ShopKey Pro are trademarks registered
in the United States and other countries of Snap-on Incorporated. All other marks
are trademarks or registered trademarks of their respective holders.

The

Bluetooth

word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by Snap-on Incorporated is under
license.

Copyright Information

©

2020 Snap-on Incorporated. All rights reserved.

Software License Information

Use of Software is governed by the terms and conditions of the End User License
Agreement. The diagnostic tool should not be initially operated until the End User
License Agreement is read. Use of the device acknowledges your acceptance of
the End User License Agreement. The Snap-on Incorporated Software End User
License Agreement may be provided with the diagnostic tool, and is available at:

eula.snapon.com/diagnostics

Patent Information

For a listing of Snap-on products that are protected by patents in the United States
and elsewhere, visit:

patents.snapon.com

Disclaimer of Warranties and Limitation of

Liabilities

All pictures and illustrations shown are for reference purposes only. All information,
specifications and illustrations in this manual are based on the latest information
available at the time of printing and are subject to change without notice. While the
authors have taken due care in the preparation of this manual, nothing contained
herein:

•

Modifies or alters in any way the standard terms and conditions of the
purchase, lease, or rental agreement under the terms of which the equipment
to which this manual relates was acquired.

•

Increases in any way the liability to the customer or to third parties.

Snap-on

®

reserves the right to make changes at any time without notice.

IMPORTANT

Before operating or maintaining this unit, please read this manual
carefully paying extra attention to the safety warnings and precautions.

Manuals / Technical Documentation - The information in this manual is periodically
revised to ensure the latest information is included. Download the latest version of
this manual and other related technical documentation from the
Snap-on Diagnostics website.

ZEEMS342A Rev. F 3-A-20 NA

«
...
232
233
234
235
»

Содержание Zeus












































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Zeus

Бренд: ABB Страницы: 36

Бренд: ABB Страницы: 40

Бренд: Waterwise Страницы: 12

Бренд: ParaBody Страницы: 38

Бренд: Datex-Ohmeda Страницы: 80

Бренд: MacDon Страницы: 2

Бренд: V-TAC Страницы: 6

Бренд: SAMCHULLY Страницы: 48

Бренд: HAGER WERKEN Страницы: 2

Бренд: Panta Safe Light Страницы: 2

Бренд: Calrec Страницы: 70

Бренд: Idex Страницы: 141

Бренд: IDEAL Networks Страницы: 8

Бренд: IDEAL Networks Страницы: 5

Бренд: H&S Страницы: 42

Бренд: natus Страницы: 20

Dantec Keypoint G4

Бренд: natus Страницы: 42

Бренд: natus Страницы: 149

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды