Snap-On Zeus, Руководство пользователя

Страница: 112 / 235

Scope and Multimeter Operations Getting Started
105
9.6.4 Pairing and Hardware Status Icons
When the Scope Module is connected (docked or USB cable), it automatically pairs
with the diagnostic tool.
z
To check the paired status of the Scope Module:
1. Select System Settings > Paired Devices .
The paired devices screen opens (
Figure 9-6
).
The Paired Devices screen lists all of the devices paired to the diagnostic tool, and
also indicates whether or not there is active communication occurring.
The Scope Module will be listed as SCOPE MODULE M4 or similar.
Figure 9-6
Typical Paired Devices screen
If the Scope Module is not shown in the Paired Devices list, check to make sure it
has a good connection. Use the Hardware Status icons to determine connection
status, see
Hardware Status Icons on page 105
.
Hardware Status Icons
The hardware status indicators in the lower-right corner of the Home screen provide
a quick reference to connection status.
Figure 9-7
Home screen - Hardware status icons
Status/Icon Action
Not Paired
Indicates the Scope Module is not paired or connected to the
diagnostic tool.
Pair the Scope Module to the diagnostic tool. See
Pairing and
Hardware Status Icons on page 105
for instructions.
Paired and
Communicating
Indicates the Scope Module is connected and allowing
communication.
Paired but Not
Communicating
Indicates the Scope Module USB cable is not connected, or is
connected but not allowing communication. Check to ensure the
Scope Module is properly connected with the USB cable.
Hardware Status