Scope and Multimeter Operations
Ignition Scope
133
5.
From the Preferences menu select
Setup
).
Figure 9-58
6.
From the sub-menu select
Ignition
).
Figure 9-59
The main ignition setup menu opens.
7.
Choose an ignition system
Type
, there are four types of ignition system
choices available.
The basic setup of each Type, are described in the following sections.
–
–
–
–
NOTE
It is important that you choose the ignition system type first, as other settings
are dependent on this selection.
Standard
Standard is used for ignition systems with a distributor (
).
1.
Enter the
Number of Cylinders
.
2.
Select the
Firing Order
.
3.
Select
Plug
for Number 1 Trigger setting.
Setup Notes:
–
Selecting Coil (for Number 1 Trigger setting) should only be used to supply
an RPM signal when the #1 trigger lead is connected to the coil wire.
–
Connect the #1 trigger lead to cylinder #1.
4.
Refer to the following sections for additional ignition scope settings:
–
Traces (Ignition Scope Trace Setup)
–
Sweep (Ignition Scope Sweep Setup)
–
For common settings within the Preferences menu, see
Figure 9-60
Содержание Zeus
Страница 1: ...User Manual ZEEMS342A Rev F TM Start BC ...
