Smith & Nephew LENS Integrated System, Руководство по эксплуатации и обслуживанию

Страница: 41 / 48

41
10601034 Rev. B
LENS Integrated System Operations/Service Manual
LENS Integrated System Specifications*
LENS Integrated System Specifications*
Power Requirements 100–240VAC, 50/60 Hz; dual fuse
Classification CISPR 11 Class A
Equipment Classification Protection against electrical shock Class 1, type CF equipment. The Endoscope is the intentionally Applied
Part, while the Camera Head, attached cable and Light Pipe were considered as Applied Parts (except for
markings and temperature limits) due to the probability of incidental patient contact.
Protection against harmful ingress of water: Ordinary equipment, none provided.
Degree of safety of application in the presence of flammable anesthetics with mixture of air, oxygen, or
nitrous oxide: Not suitable.
CCU Dimensions 4.62 in. H x 14.06 in. W x 15.31 in. L / 11.73 cm. H x 35.71 cm. W x 38.89 cm.
CCU Weight 13.3 pounds / 5.9kg
Display Output 60 Hz
Resolution 1920 x 1080p (native)
Shutter 1/60 second through 1/10,000 second shutter speed (50 Hz/60 Hz)
Y/C Video Outputs One Y/C video output, combined luminance/chroma signal into 4-pin mini-DIN plug
Wi-Fi 2.4Ghz 802.11 b/g/n WPA-2
USB Storage 32 GB recommended, minimum 8 GB, Class 10/Huss Speed Class 1//UHS (Ultra High Speed). FAT32 or
NTFS formatted. The following USB devices have been validated for use with the System:
• 4x8 GB USB Sticks (Transcend, Corsair
T
, Imation
T
, Kingston)
• 4x16 GB USB Sticks (ADATA
T
, Mushkin, Silcon Power
T
, generic (Team))
• 4x32 GB USB Sticks (Corsair, Patriot
T
, PNY
T
, Silcon Power)
• 4x64 GB USB sticks (2 Generics, Mushkin, & ADATA)
• 2x1 TB external SSD hard drives (Buffalo & Western Digital)
USB Output Two USB Type A connectors; provides USB-compatible connection to flash or hard drives.
HD Serial Digital Interface (HD-SDI) Two serial digital interfaces (HD-SDI) with 4:2:2 component digital video output on BNC connector
HD Digital Visual Interface (HD-DVI) One digital visual interface supporting HD-DVI Digital (DVI-D) single-link interfaces on 29–pin HD-DVI I
connector
AC Leakage Current Control unit: less than 500 microamps earth leakage
Video Accessory Controls Two mini-phono connectors (3.5 mm)
Compliance IEC 60601-1: 2005 + CORR. 1:2006 + CORR. 2:2007 + AM1:2012
IEC 60601-1 2012 (Third Edition)
IEC 60601-2-18:2009 (Third Edition)
EN60601-1:2006/A1:2013
ANSI/AAMI ES60601-1:2005+A2 (R2012) +A1
CSA C22.2 No. 60601.1:2014
CSA C22.2 No. 60601.2.18:2011
Fuse Type F10AH250V; V and I rating: 250V, 10A; Fast-blow/High Capacity
Modes of Operation Continuous
*Specifications subject to change without notice.
Environmental Conditions
Condition Transport and/or Storage Use
Temperature -20– +140° F (-29– +60 °C) +50–104° F (+10–40 °C)
Humidity 15–85% (no condensation allowed) 30%–75%
Atmospheric pressure 60–106 kPa 60–106 kPa
Altitude 3000 meters maximum