Smith & Nephew LENS Integrated System, Руководство по эксплуатации и обслуживанию

Страница: 25 / 48

25
10601034 Rev. B
LENS Integrated System Operations/Service Manual
Capture Images
Capture Images
Ensure that the camera icon on the OSD status bar indicates Ready and
that the button mappings are set for image capture. The System defaults
to Live Video after a White Balance has been performed. Images can be
captured when the System is in Live Video mode. The button map for
the selected procedure appears in the lower right corner of the OSD.
Refer to Table 1 in the “Camera Head” section of the “System Controls”
section of this manual for the System’s default button settings for the
camera head.
Note: When both an iPad and a USB or other image storage device are
connected, the information displayed in the patient information box
(Figure 4) is the information from the App. The App supercedes the USB
information on the OSD, but information is recorded to both deivces.
To Capture a Still Image
To record a still image, firmly press the button mapped to Frame
Capture (or ALT FRAME). If using the App or a USB for image storage,
when the image is captured, the image counter in the upper left corner
of the OSD increases by one. If the counter does not increase, the
image has not been recorded. If the image counter does increase, the
image is saved to the connected image storage devices. For information
regarding how to capture still images from the App, please refer to LENS
Application Instructions for Use (REF 10601295). For information about
how to customize button settings, refer to the “Button Settings” section
of this manual.
Note: If the App and a USB are connected to the System, the captured
image will be saved to both devices.
If using the 660HD, images will be stored directly to that device.
Buttons must be mapped to the appropriate peripheral port. The patient
information box will not appear on the OSD.
To Capture Video Images
Tablet/USB capture only:
To record a video image, press the button mapped to
Video Capture
and release the button. To stop recording, press and relase the Video
Capture button again. The camera icon on the OSD remains red until
the video has been transferred to the storage device(s) and confirmed
as saved. The video counter in the upper left corner of the OSD
increases by one. If the counter does not increase, the video has not
been recorded.
For information regarding how to capture video images from the
App, please refer to LENS iPad Application Instructions for Use (REF
10601295). For information about how to customize button settings, refer
to the “Button Settings” section of this manual.
If capturing video to the 660HD image management system, ensure
that the ports are mapped to the camera head buttons ( Acc1 or Acc2)
correctly. Videos will be saved directly to the image management
system.