Smith & Nephew LENS Integrated System, Руководство по эксплуатации и обслуживанию

Страница: 31 / 48

31
10601034 Rev. B
LENS Integrated System Operations/Service Manual
Customize the System
Language
To customize the language that appears on the OSD:
1. Select the
LANGUAGE icon on the SYSTEM CONFIGURATION MENU
screen to open the LANGUAGE MENU screen (Figure 29).
Figure 29 .
2. Use the Up and Down arrows on the control unit or the left and right
camera head buttons to scroll through the available languages.
3. When the desired language blinks, press Select to select it. The
System will return to the SYSTEM CONFIGURATION MENU screen.
The OSD will change to the language that was selected.
Reset Factory Defaults
To reset the System to the original factory default settings:
1. Select the
RESET FACTORY DEFAULTS icon on the SYSTEM
CONFIGURATION MENU screen to open the RESET FACTORY
DEFAULTS screen (Figure 30). RESET FACTORY DEFAULTS will blink.
]
Figure 30 .
Select
EXIT to exit the RESET FACTORY DEFAULTS screen and return
to the SYSTEM CONFIGURATION MENU screen without resetting to
the factory defaults
2. To reset the System to the original factory default settings, select
RESET FACTORY DEFAULTS . A confirmation screen containing the
question ARE YOU SURE? will open (Figure 31). YES will blink.
Figure 31 .
3. Select YES to restore the original factory default settings. The
System will replace all previously customized settings for all
procedures and advanced settings with the original factory default
settings and return to the SYSTEM CONFIGURATION MENU screen.
Select
NO to retain previously saved settings and exit the RESET
FACTORY DEFAULTS screen without making any changes. The
System returns to the SYSTEM CONFIGURATION MENU screen.
Network
Note: This section applies only to the Wi-Fi enabled version of the
control unit.
The NETWORK SETTINGS screen allows the user to change the settings
that enable the System network to connect to the iPad. The LENS
network ID and network password are required in order to connect the
iPad to the System network. To change the network settings:
1. Navigate to the
NETWORK icon on the SYSTEM CONFIGURATION
MENU screen. Press Select to open the NETWORK SETTINGS
screen (Figure 32).
Figure 32 .
2. To reset the Wi-Fi or image management system, select
RESET WIFI
or RESET IMS, whichever one appears on the screen.
To change the network ID:
1. Navigate to NETWORK ID = and press Select. An OSD keyboard
appears below the NETWORK SETTINGS menu.
2. Use the Up and Down arrows on the control unit or the left and
right camera head buttons to navigate to the desired letters on the
keyboard.
Note: A short press moves the highlighted cursor left or right. A
long press moves the cursor up or down from line to line. To select
a letter, number, or symbol, press Select. To exit the keyboard,
navigate to the Return key and press Select.
3. To save the changes and exit the NETWORK SETTINGS screen,
select SAVE AND EXIT to return to the SYSTEM CONFIGURATION
MENU screen. To exit the screen without saving any changes,
navigate to CANCEL and press Select to return to the SYSTEM
CONFIGURATION MENU screen.