Smartgen HGM8100A Скачать руководство пользователя страница 6

Страница: 6 / 57

HGM8110A/8120A Genset Controller User Manual Page 6 of 57

OVERVIEW

HGM8110A/8120A genset controllers are especially designed for extremely high/low temperature

environment (-40~+70)°C. The controllers can operate reliably in extreme temperature conditions

with the help of VFD display and the components that resist extreme temperature. All display

information is Chinese (English is optional). Operation information, status information and faults

information are all displayed which make commissioning convenience for factory personnel.

Controller can be used under complex electromagnetic interference environment with the strong

ability of anti-electromagnetic interference. Easy to maintain and upgrade due to the plug-in terminal.

HGM8110A/8120A genset controllers integrate digitization, intelligentization and network

technology which are used for genset automation and monitor control system of single unit to

achieve automatic start/stop, data measuring, alarm protection and “four remotes” (remote control,

remote measuring, remote communication and remote regulating).

HGM8110A/8120A

genset controllers

adopt micro-processor technology with precision parameters

measuring, fixed value adjustment, time setting and

threshold adjusting and etc. Majority

parameters can be configured from front panel, and all parameters can be configured by RS485

interface (or RS232) to adjust via PC. It can be widely used in all types of automatic genset control

system with compact structure, advanced circuits, simple connections and high reliability.

Содержание HGM8100A


























































Результаты поиска

Содержание HGM8100A

Отзывы:

Бренды по названию

Популярные бренды

Smartgen HGM8100A, Руководство пользователя

Результаты поиска

Содержание HGM8100A

Отзывы:

Бренды по названию

Популярные бренды