Smartgen HGM8100A, Руководство пользователя

Страница: 39 / 57

HGM8110A/8120A Genset Controller User Manual Page 39 of 57
No. Type Description
27 Reserved
28 Reserved
29 Close Generator Control generator to take load.
30 Open Breaker Control breaker to off load.
31 Close Mains Control mains to take load.
32 Reserved
33 Crank Relay
34 Fuel Relay
Action when genset is starting and disconnect when
stop is completed.
35 Idle Control
Used for machine which has idles. Close before starting
and open in warming up delay; Close during stopping
idle mode and open when stop is completed.
36 Raise Speed Action in warming up delay.
37 Drop Speed
Action between the period from “stop idle” to “failed to
stop”.
38 ETS Control
Used for engines with ETS electromagnet. Close when
stop idle is over and open when pre-set “ETS delay” is
over.
39 Pulse Drop Speed
Active 0.1s when controller enter into stop idle, used for
control part of ECU dropping to idle speed (temporary
reserved).
40 Reserved
41 Reserved
42 Pulse Raise Speed
Active 0.1s when controller enter into warming up delay;
used for control part of ECU raising to normal speed
(temporary reserved).
43 Crank Success Close when detects a successful start signal.
44 Generator OK Action when generator is normal.
45 Generator Available Action in period of generator ok to high-speed cooling.
46 Mains OK Action when mains normal.
47 Reserved
48 Common Alarm
Action when genset common warning, common
shutdown, common trips alarm.
49 Common Trip and Stop Action when common trip and stop alarm.
50 Common Shutdown Action when common shutdown alarm.
51 Common Trip Alarm Action when common trip alarm.
52 Common Warn Alarm Action when common warning alarm.
53 Reserved
54 Battery High Volts Action when battery’s over voltage warning alarm.
55 Battery Low Volts Action when battery’s low voltage warning alarm.
56 Charge Alt Fail Action when charge failure warning alarm.
57 Reserved