SMART Board SmartBoard 600i2, Конфигурация и руководство пользователя

Страница: 62 / 74

52 Remote Management of Your 600i2 Interactive Whiteboard System 99-00850-21 B0
Query Commands
* This command bypasses internal buffering and generates a response immediately.
Projector Power Control Commands
** You must send the off command twice. The first command displays an on-screen message, and the second
command shuts off the system. You must send the second command within five seconds of the first, or the first
command times out.
Command Result Response (On-Screen)
get fwver
Displays the ECP’s firmware
version* FW version = #
get bootver
Displays the ECP’s bootloader
version* Bootloader version = #
get input
Displays the projector’s input* Input = #
get powerstate
Displays the projector’s power state
(Idle, Powering, On
or Cooling)*
Power state = #
get brightness
Displays the projector’s brightness
setting Brightness = #
get contrast
Displays the projector’s contrast
setting Contrast = #
get volume
Displays the projector’s volume
setting Volume = #
get lamphrs
Displays the number of hours the
projector lamp has been in use Lamp hours = #
get syshrs
Displays the number of hours the
interactive whiteboard system has
been in use System hours = #
get pjfwver
Displays the projector’s firmware
version Projector FW version = #
get pjserial
Displays the projector’s serial
number Projector serial number = #
Command Result Response (On-Screen)
off now
Turns off the Unifi 45 projector
immediately Turning off
off
Turns off the Unifi 45 projector
normally** Turning off
on
Turns on the Unifi 45 projector
normally Turning on