SMART Board SmartBoard 600i2, Конфигурация и руководство пользователя

Страница: 49 / 74

99-00850-21 B0 Maintaining Your 600i2 Interactive Whiteboard System 39
To reset the lamp timer
1. Press the power button on the ECP or remote control twice to put the projector back into Standby
mode. The power button light on the ECP turns solid amber when the system is in Standby.
2. Press and hold the up button on the remote control for approximately 10 seconds. When the projector
beeps, press and hold the down button on the remote control for approximately 10 seconds. The lamp
timer clears after another beep.
3. Press the power button on the ECP or the remote control to start up the system. The power button light on
the ECP turns solid green when the system starts.
4. To confirm that the lamp timer has been reset, press the MENU button on the remote control. Scroll to the
Status Display menu heading, and then confirm that 0 h appears in the Lamp timer field. Your lamp reset
count has increased by one.
5. Wait five minutes for the projector lamp to warm up.
6. After confirming that the lamp timer has been reset, put the system in Standby by pressing the power button
twice on the ECP or the remote control. The power button light on the ECP turns solid amber when the
system is in Standby.
7. When you are ready to use the system, press the power button on the ECP to start up the system.