SMART Board SmartBoard 600i2, Конфигурация и руководство пользователя

Страница: 18 / 74

8 Before Installing Your 600i2 Interactive Whiteboard System 99-00850-21 B0
Dust and Scratching
SMART Board 600i2 interactive whiteboard systems are for use in office and classroom environments and are
not for industrial use, where heavy dust and pollutants can cause malfunctions or impaired operation
. The
design is for pollution degree 1 (P1) as per EN61558-1, which is defined as “No pollution or only dry
non-conductive pollution.”
Electrostatic Discharge (ESD)
SMART Board 600i2 interactive whiteboard systems meet the requirements of EN61000-4-2 severity level 4 for
direct and indirect ESD. No malfunction or damage up to 8kV (both polarities) with a 330 ohm, 150 pF probe (air
discharge). Unmated connectors meet 4kV (both polarities) for direct (contact) discharge.
Cables
All SMART Board 600i2 interactive whiteboard system cables should be shielded, to prevent potential accidents
and degrading video and audio quality.
Conducted and Radiated Emissions
The narrowband radiated electric field from SMART Board 600i2 interactive whiteboard systems meets the limits
for Class A performance as defined in EN55022/CISPR 22.
IMPORTANT
Before Installing Your SMART Board 600i2 Interactive Whiteboard System
Choose a location for your SMART Board 600i2 interactive whiteboard system that’s far from a bright light
source, such as windows or overhead lighting. Bright light sources can cause distracting shadows on the
interactive whiteboard and can reduce the contrast of the projected image.
Locate a wall with a flat, regular surface and minimum clearance to accommodate your interactive whiteboard
system. Make sure that the Unifi 45 projector and the SMART Board interactive whiteboard are installed on the
same flat surface. For best presentation alignment, SMART recommends that you mount your interactive
whiteboard system in a location that is central to your audience’s viewing direction. For mobile installation or
adjustable installation options, contact your
authorized SMART reseller . If the mounting surface is slightly
irregular or the interactive whiteboard system cannot be directly mounted on a stud, consult Mounting SMART
Board 600i2 Series Interactive Whiteboard Systems and Unifi 45 Projectors on a Back Board ( document 119764 )
on the SMART Technical Support website .
Recommended Heights for Mounting
SMART includes a mounting template with each of its 600i2 interactive whiteboard systems. If you lose this
template, contact your
authorized SMART reseller. Using this template ensures that you:
– mount the Unifi 45 projector at a safe height for head-space clearance, while maintaining enough
space for airflow and installation access above the unit
– position the projector at the correct height above the 600 series interactive whiteboard to make sure
that the projected image aligns with the touch screen.
Using the Unifi 45 projector system near a TV or radio may cause interference to the images or
audio sound. If this happens, move the TV or radio away from the projector.