SKYLUX Climax 36178, Руководство по установке

Страница: 11 / 88

20/11/2020
11/88
E_MH_Installation_instructions_Skylux_Climax
General installation tips
Please read this manual carefully.
The installation must be carried out by people with sufficient technical knowledge and experience in the area of
conservatory installation. The installer must take the required safety measures into account during the installation
such as the use of scaffolding and personal protection equipment (safety shoes, helmet (i.e. a hard hat), gloves,
safety goggles, etc.) to ensure the work is carried out in a safe environment. During installation, please make sure
that the necessary precautions have been taken to ensure the stability of the unfinished construction.
Fixing material
The selection of required fixing material is dependent on the foundation or the walls. Check whether the
foundation and the walls on which the structure is to be anchored have a sufficient load-bearing capacity. The
installer is responsible for the assessment of the appropriate fixing materials for the load and foundation on which
the structure is to be fixed. Please contact your fixing material supplier or specialised engineering consultants in
case of doubts. Skylux cannot be held liable for the installation or the fixing materials used.
Seal installation
A distinction is made between push-in seals and slide seals.
The seal of a push-in seal is pushed into the profiles. The C2CX, C12, C8, CY10, C11CX and C31 seals are push-in
seals.
Slide seals C1CX and C5 are slid into the profiles.
Seals C1CX and C2CX are equipped with an anti-stretch wire that prevents the seal from being stretched during
installation. This technology ensures that the seal cannot shrink after installation.
Avoid the use of silicone and detergent when installing the seals. Plastic sheets can be damaged by these products.
Plastic sheets can result in settlement noise due to temperature fluctuations. This will not affect the guarantee and
will not be accepted as a claim.
Terms, conditions and guarantee
The guarantee is void when the installation instructions provided below are not followed. Not following the
instructions and/or using other parts may have an adverse effect on the safety and life cycle of the product.
Deviations are not permitted without the written permission from the manufacturer. The installer must take the
specified span values in relation to the glazing and load (snow and wind) according to the applicable standards into
account.
The load graphs that you will find in this manual on pages 76 - 80 are only indicative. Contact the manufacturer,
architect or engineering consultant for porch roofs outside the normal range.
The manufacturer reserves the right to make technical changes without prior verbal or written notification.
Skylux reserves the right to change this manual without prior notification. Changes with regard to the installation
requirements or to the product will not mean a right to any compensation or exchange of parts.
The latest version of this manual can be consulted by visiting www.skylux.be.
Climafast
The CLIMAFAST calculation application, free of charge by Skylux. You will receive information on how to log on
and download the Excel version of the application upon request. With Climafast you can determine the price of
your Climax roof. An overview of profiles, lengths, parts, permitted loads, etc. is provided for each project. The
aim of this application is to inform the user.
Skylux reserves the right to change the Climafast calculation application without prior notification. The results
of the calculations are not final and will not mean that there is a right to compensation. The latest version of the
calculation application can always be downloaded from www.skylux.be.