background image

BEFORE YOU BEGIN

ATTENTION: Read instructions 
carefully before use.

Recommended setup procedures are 
outlined in this document. 

For safety reasons it is recommended 
that at least two persons erect any  
marquee setup.

Ensure the area is free from any sharp 
objects, overhead structures or other 
obstructions.

  WARNING: Keep clear of   
  overhead power lines.

SIZES: 1.5m x 1.5m, 2.4m x 2.4m, 3m x 3m, 3m x 4.5m, 3m x 6m

CONTENTS

WHAT YOU’LL NEED 

 

1

PARTS LIST 

 

1

HOW TO STORE 

 

1

TRANSPORTING  

 

1

SECURING YOUR MARQUEE 

 

1

SETUP INSTRUCTIONS 

 

2

PACK DOWN INSTRUCTIONS 

 

3

PROTECTIVE COVER & 
ATTACHING WHEELS  

 

5

OPTIONAL ACCESSORIES INSTRUCTIONS   

6

BANNER INSTRUCTIONS 

 

9

IMPORTANT INFORMATION 

 

10

THINGS YOU SHOULD KNOW

Your marquee is supplied with steel pins and 
tie-down ropes. These 

MUST

 all be used. For 

setup on hard surfaces such as pavement, 
weight plates, water weights or sandbags 

MUST

 be used for security.  

These are add-on accessories that can be 
purchased separately.

All roof tie-down straps 

MUST

 be attached 

and tensioned. These security methods 
will maximise safety. However, due to the 
unpredictable nature of weather, damage 
prevention is not guaranteed.

All folding marquees are considered temporary 
structures and 

MUST

 be packed down and 

stowed away in any adverse weather conditions 
such as storm, rain or wind gusts. Your marquee 
should never be left up unattended.

Prolonged exposure to the sun can seriously 
degrade the material and/or cause it to 
become discoloured.

WARNING: KEEP ALL FLAME 
AND HEAT SOURCES AWAY 
FROM THE TENT FABRIC.

This marquee is built with flame 
retardant. The fabric may burn if left 
in continuous contact with any flame 
source. The application of any foreign 
substance to the marquee fabric may 
render the flame-resistant properties 
ineffective.

THIS PRODUCT MEETS AUSTRALIAN 
STANDARDS

Please check with your local 
regulations prior to purchasing this 
item. Some municipalities have 
restrictions and requirements.

VISIT WEBSITE

CLICK HERE

Содержание X6 VELOCITY













Отзывы: