5
1. Prepare all parts for assembly.
REMOVE the zip ties from wheels, keep the
bearings in position.
2. Insert the bolt through the wheel and
bearing. Thread the nut until finger tight to
secure the wheel. Repeat on other side.
3. Insert the assembled wheel and bolt into
the connector on the base of protective cover,
then thread the bolt until finger tight.
MOVING WHEELED PROTECTIVE
COVER
with marquee fitted. Check area/path is clear
of objects. Holding top and bottom handles
of protective cover, lean the unit back until all
weight is on wheels. Push forward carefully.
5. Fasten the nut on the inside of wheel until
tight. ENSURE WHEEL SPINS FREELY.
Repeat on other side.
4. Equip the spanner provided. Tighten the
bolt on the outside of wheel until tight.
X5 & X6 PROTECTIVE COVERS - ATTACHING WHEELS
Recommended procedure to follow in this document. What you’ll need: Stanley Knife or Scissors are required.
