1
WHAT YOU’LL NEED
Stanley Knife / Scissors to open boxes. Only cut where symbol is shown on boxes.
Mallet / Hammer to secure steel pins.
1x Marquee Roof
1x Marquee Frame
4x Tie-Down Straps
1x Protective Cover
PARTS LIST
Standard package items listed below. Please note accessories are not listed here.
1. CLEAN & DRY
2. PACK DOWN
3. TRANSPORT
The marquee must be stood upright during transit if the roof is kept on the frame.
4. STORAGE
HOW TO STORE
IMPORTANT NOTES BEFORE TRANSPORTING
Pack down individual items and store
them in protective coverings.
If your marquee needs to be positioned
horizontally during transit you MUST
remove the roof to prevent damage.
Ensure that the marquee is
firmly secured to prevent
movement whilst in transit.
Fit the Tie-Down Straps, Sandbags, Steel Pins or Weight Plates and anchor the marquee in to position. Please refer to the engineer certificates
found on the website resource page for applicable hold-down weight methods. www.extreme-marquees.co
.nz
/resource-centre/
SECURING YOUR MARQUEE
UPGRADE
15kg SANDBAG
UPGRADE
10-16kg WATER WEIGHT
UPGRADE
15kg STEEL WEIGHT PLATE
STANDARD PACKAGE
STEEL PINS
STANDARD PACKAGE
TIE-DOWN STRAPS
8 x Pins
3x3m & 3x4.5m
10 x Pins
3x6m
