Sirona XIOS XG Select, Инструкция по эксплуатации и установке

Страница: 79 / 120

Sirona Dental Systems GmbH
Gebrauchsanweisung und Installation 5 Operation
64 08 137 D3610
D3610.201.02.09.02 11.2017
79
5.6.1.5 Endodontics exposures with the half-angle technique
For endodontics exposures with the half-angle technique use the green
universal sensor holder tab.
1. Slide the sensor into the hygienic protective sleeve, see section
"Slide the hygienic protective sleeve over the sensor".
2. Glue the green universal sensor holder tab onto the sensor's
hygienic protective sleeve. Place the tab in the center of the sensor
as shown in the diagram.
3. For anterior tooth exposures: Glue the sensor holder tab onto the
sensor's hygienic protective sleeve. Align the tab to the sensor edge
of the cable and place it in the center on the sensor, as shown in
the diagram.
4. For posterior tooth exposures the tab must be aligned vertically to
the sensor and placed in the center on the sensor. See the adjacent
drawing.
5. Position sensor in patient's mouth.
6. Bring the X-ray tube assembly into the correct position and take an
X-ray exposure.
7. Remove the sensor from the hygienic protective sleeve. For this
follow the instructions in section "Remove the hygienic protective
sleeve from the sensor" [→ 95]. The used sensor holder tab and
hygienic protective sleeve must be disposed of after the
examination.
8. Clean and sterilize the tab.