Sirona Dental Systems GmbH
Gebrauchsanweisung und Installation
6 Maintenance and inspection
64 08 137 D3610
D3610.201.02.09.02 11.2017
101
6
Maintenance and inspection
6.1
Hygiene
Disinfect and sterilize accessories prior to initial use and after each
patient.
6.1.1
Care, cleaning agents, and disinfectants
NOTICE
Approved care, cleaning, and disinfecting agents
Use only care, cleaning and disinfecting agents approved by Sirona!
For a continuously updated list of approved agents, please visit
"www.sirona.com". To access the online portal for technical
documentation, follow the
"SERVICE" / "Technical Documentation"
menu items in the navigation bar. The portal can also be accessed
directly via the following address
. Click
on the menu item
"General documents" and then open the "Care,
cleaning and disinfection agents" document.
If you do not have any access to the Internet, please contact your dental
depot to order the list (REF 59 70 905).
6.1.2
WiFi interface, charger and sensors
134°C 273,2°F
93°C
197°F
NOTICE
Liquids can get into the WiFi interface, charger or sensor during
cleaning and disinfection. The plug contacts may become wet.
Electronic components may be damaged or destroyed by a short
circuit.
➢ Before cleaning and disinfecting remove the sensor from the WiFi
interface and remove the power supply unit plug from the charger.
The system must be disconnected from the mains.
➢ The WiFi interface, charger and sensor must not be thermal
disinfected, sterilized or immersed in disinfectant. They must not
be disinfected or sterilized with radiation. Apply wipe disinfectant
only.
➢ Never spray plug connections with disinfectants or cleaning
solutions. Make sure that the plug contacts do not become wet.
NOTICE
Drugs have a chemical reaction with the surface of the unit.
Due to their high concentrations and the substances they contain,
many drugs can dissolve, etch, bleach, or stain surfaces.
➢ Wipe any drug residues off the unit immediately with a moist,
white cloth!
ü
All plug connections are disconnected.
1.
Clean the sensor, the sensor cable, the WiFi interface and the
charger with a cloth soaked in soapy water. After this, dry the
components with a lint-free cloth.
Содержание XIOS XG Select
Страница 119: ......