Sirona XIOS XG Select, Инструкция по эксплуатации и установке

Страница: 37 / 120

Sirona Dental Systems GmbH
Gebrauchsanweisung und Installation 4 Installation
64 08 137 D3610
D3610.201.02.09.02 11.2017
37
4.5
Setting channels at the Wireless Access Point
The WiFi interface can be operated only in the channels 1 to 11.
Limit your router / access point to the channels 1 to 11 in the case of
changing channels or set it to a fixed channel.
IMPORTANT
Wrong channel
If an already configured WiFi interface can no longer be connected,
check the channel that is displayed in the WiFi Configuration Utility.
To this end, the WiFi interface must be in the charger tray and the
charger tray must be connected with the PC using a USB cable.
If the channel 0 is displayed, the WiFi interface may not be connected
because a channel greater than 11 is active.
4.6
Configure the WiFi interface for the practice
network
Each B/G/N wireless access point should be suitable for the WiFi
system.
IMPORTANT
The WiFi interface supports the WLAN standard B and G.
If the access point is operated only with the setting "N Only", the WiFi
interface may not establish any wireless connection.
➢ Configure the access point such that devices of the B and G
standard also have access to the wireless network (setting "B/G/
N Mixed Mode").
Please consult the documentation supplied on your wireless access
point for details and additional information where you have any
questions related to the wireless network upon installation.
Establish USB connection between WiFi interface and PC
A USB connection must be established for configuration of the wireless
interface between the WiFi interface and PC. This is facilitated by the
charger.
ü
The charger is powered by the power supply unit and it is
connected to the USB interface of the PC.