Sirona XIOS XG Select, Инструкция по эксплуатации и установке

Страница: 74 / 120

5 Operation Sirona Dental Systems GmbH
Gebrauchsanweisung und Installation
74
64 08 137 D3610
D3610.201.02.09.02 11.2017
5.6
Position the sensor
Since the positioning of the sensors in the beam path of the cone
strongly influences the image quality, using the parallel technique with
the XIOS XG sensor holder system or with the #AimRight# sensor
holder system is recommended for optimal positioning of the sensors.
With the XIOS XG sensor holder system the sensor is affixed to the
sensor holder with a sensor holder tab. Sensor holder tabs may be
detached and reaffixed several times during an exposure series on the
same patient. The sensor holder tabs must be glued to the active
sensor surface (A) in all cases.
The #AimRight# sensor holder system is a plug-in system. No sensor
holder tabs are required.
NOTICE
The sensor cable is sensitive to mechanical influences.
The cable may become damaged or may wear out prematurely.
➢ Avoid bending, creasing or rotating the cable or exposing it to
other strains. Do not ride over the sensor cable, e.g., in a chair.
Do not swirl the sensor about by its cable.
➢ When removing the plug pull on the plug and not on the cable.
➢ Make sure that the sensor cable is run out of the patient's mouth
in such a way that the patient cannot bite it.
➢ Inspect the sensor cable visually for damage every day.