manualshive.com logo in svg

Sirona XIOS XG Select, Инструкция по эксплуатации и установке, Страница: 107 / 120

Поделиться
Скачать
Sirona XIOS XG Select Скачать руководство пользователя страница 107

Sirona Dental Systems GmbH
Gebrauchsanweisung und Installation

6 Maintenance and inspection

64 08 137 D3610
D3610.201.02.09.02    11.2017

107

1.

There is a screw that secures the cover of the storage battery
compartment at the opposite side of the LED. Unscrew this using
the supplied screwdriver.

2.

Remove the battery compartment cover and retain it.

3.

Pull out the plug that connects the storage battery with the WiFi
interface and take out the storage battery.

4.

Insert the plug of the replacement battery into the socket on the
WiFi interface. The connector can be plugged into the socket easily
with the correct polarity.

5.

Insert the replacement battery into the battery compartment.

!

6.

Slide the hook of the battery compartment cover below the recess
on the WiFi interface. Then, push the cover onto the WiFi interface
so that it locks in place.

7.

Secure the cover by screwing the screw down again using the
screwdriver supplied.

8.

Plug the WiFi interface into the charger. Leave it plugged in until the
storage battery has charged fully.

Ä

The battery replacement is now completed. The WiFi interface can
be reused.

Содержание XIOS XG Select

























































































































Отзывы:

Нет отзывов