FCC Part 15.19
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
FCC Part 15.21
Any changes or modifications (including the
antennas) to this device that are not expressly
approved by the manufacturer may void the
user’s authority to operate the equipment.
Samsung Mobile Products and
Recycling
WARNING!
Never dispose of batteries in
a fire because they may explode. Do not
disassemble, crush, puncture, heat, burn
or reuse.
For battery and cell phone recycling, go
to call2recycle.org or call 1-800-822-8837.
For more recycling information, go to our
website:
www.samsung.com/recycling or call
1-800-SAMSUNG.
Samsung Electronics America, Inc
85 Challenger Road,
Ridgefield Park, New Jersey, 07660
Phone: 1-800-SAMSUNG (726-7864)
English
Copyright © 2021 Samsung Electronics
America, Inc.
Bluetooth
®
is a registered trademark of
Bluetooth SIG, Inc. worldwide.
Other marks are the property of their
respective owners.
•
Your device contains magnets. Keep a safe
distance between your device and objects
that may be affected by magnets such
as credit cards and implantable medical
devices. If you have an implantable medical
device, consult your physician before use.
•
If the product is exposed to humidity,
solvents such as acetone or alcohol, or
very hot temperatures, it may be stained,
wrinkled, misshapen, or change color.
•
Visit
www.samsung.com to view the user
manual.
•
Your consumer rights are governed by the
law of the country in which you purchased
the product. Please contact your service
provider for more information.
d
c
e
a
b
EJ-P5450
QUICK START GUIDE
S Pen Pro
FCC ID : A3LEJP5450
Printed in Korea
A00955 Rev.1.0
USA Type 06/2021
Device layout
Pen button
Status LED
Connection button
Mode switch
Charger connector jack (USB Type-C)
Connecting to a mobile device
1. Press the connection button (
).
2. When a connection pop-up window
appears on the mobile device, tap
Connect
.
3. Follow the on-screen instructions to
complete the connection.
•
Before connecting to a mobile
device, update its One UI to
a version higher than 3.1 and
the SmartThings app and Air
command to the latest version.
•
When a connection pop-up
window does not appear on the
mobile device, launch the
Settings
app, tap
Advanced features
→
S Pen
→
Air actions
, and follow
the on-screen instructions to
complete the connection.
Using the S Pen on a foldable
mobile device
To use the S Pen on a foldable mobile device,
set the mode switch (
) to
Z Fold
.
