Sirona SIM MODULAR Скачать руководство пользователя страница 201

Страница: 201 / 218

65 64 020 D3650

D3650

201.01.02

02 04.2016

201

Sirona Dental Systems GmbH

5 Care, cleaning and maintenance by the user

Operating Instructions Simulation Unit SIM MODULAR

5.10 Sanitizing

båÖäáëÜ

Error message: Inserting instruments in the supply module

If an instrument is accidentally deposited in its holder during the reaction

time, the message

Insert instruments into water unit

is displayed on the

touchscreen after the simulation unit is switched on. The sanitizing

process is then completed anyway.
1. Remove the accidentally removed instrument and place it back in the

adapter on the supply module so that it can be rinsed in sanitation

phase 5.

2. If you want to exclude the instruments from sanitation, touch the

Exclude instrument

key.



Excluded instruments will not be rinsed in sanitation phase 5.

Sanitation phase 5 – Rinsing water lines with water

The DENTOSEPT P disinfectant is rinsed out of the SPRAYVIT hoses

and instrument hoses with water. This takes several minutes.

Sanitation phase 6 – Returning instruments to their holders

After the water lines have been rinsed, the instruments can be removed

from the cleaning adapters on the supply module and returned to their

holders.

✔

The

Return instruments to their holders

display appears on the

touchscreen.

➢ Place the SPRAYVIT sleeves and the straight and contra-angle

pieces on the instruments. Place all the instruments back in their

holders.



The sanitation process is finished. The simulation unit is ready for
operation again.

Displays in case of incomplete sanitation

The sanitation program detects whether the sanitation of all instruments

was completed. Errors that occurred during sanitation will be displayed on

the touchscreen as follows:

● Crossed-out, solid gray circle: The instrument was excluded from

sanitation before it had been filled with DENTOSEPT P disinfectant

● Orange circle with warning triangle: The instrument was not

(sufficiently) rinsed; the water lines still contain disinfectant

➢ In the latter case, rinse the affected instruments and tumbler filling

manually after sanitation.

Stop

H2O

Desinf

Stop

H2O

Desinf

Stop

H2O

Desinf

Stop

H2O

Desinf

Содержание SIM MODULAR



























































































































































































































Результаты поиска

Содержание SIM MODULAR

Отзывы:

Похожие инструкции для SIM MODULAR

Бренды по названию

Популярные бренды

Sirona SIM MODULAR, Руководство по эксплуатации

Результаты поиска

Содержание SIM MODULAR

Отзывы:

Похожие инструкции для SIM MODULAR

Бренды по названию

Популярные бренды