Sirona SIM MODULAR Скачать руководство пользователя страница 166

Страница: 166 / 218

65 64 020 D3650

166

D3650

201.01.02

02 04.2016

5 Care, cleaning and maintenance by the user

Sirona Dental Systems GmbH

5.3 Instruments and instrument hoses

Operating Instructions Simulation Unit SIM MODULAR

Inserting water-carrying instruments into the cleaning adapters of the

supply module

The supply module has integrated adapters for water-carrying

instruments. These enable all instruments to be purged with water. For

this purpose, water-carrying instruments must be inserted into adapters

on the supply module.
1. Remove the SPRAYVIT sleeves from the valve bodies and the

straight and contra-angle handpieces from the water-carrying

instruments.

2. If the adapters are not yet located in the receptacles of the supply

module, insert them until they lock into place. The SPRAYVIT

adapters can be inserted only into the two receptacles on the right

side of the dentist element with the guide rib facing upward. Similarly,

a SPRAYVIT adapter must be inserted into the assistant element

side. The adapters remain in the supply module permanently.

3. Dentist element side: Insert the couplings of all water-bearing

treatment instruments into the adapter in the supply module (for

SPRAYVIT E: valve lever in the up position, locking knob in the down

position).

4. In addition for the CS dentist element: Move the swivel arm of the

instruments to be purged into the operating position so that the weight

of the instrument hoses allows them to remain in this position.

IMPORTANT

Arrangement of adapters
The adapters for the instrument couplings are color coded:
Yellow = SPRAYVIT E, water on right button

Orange = SPRAYVIT E, water on left button

White = highspeed handpiece

Blue = BL ISO E motor (ISO interface)

Red = SIROSONIC L scaler

0123

Содержание SIM MODULAR



























































































































































































































Результаты поиска

Содержание SIM MODULAR

Отзывы:

Похожие инструкции для SIM MODULAR

Бренды по названию

Популярные бренды

Sirona SIM MODULAR, Руководство по эксплуатации

Результаты поиска

Содержание SIM MODULAR

Отзывы:

Похожие инструкции для SIM MODULAR

Бренды по названию

Популярные бренды