Sirona Orthophos XG Plus DS/Ceph, Руководство по эксплуатации

Страница: 25 / 128

Sirona Dental Systems GmbH 3 Controls and functional elements
Operating Instructions ORTHOPHOS XG
Plus
DS/Ceph 3.2 General touchscreen functions
59 87 594 D 3352
D 3352.201.01.18.02
25
Service menu
The Service menu is intended for service engineers
only.
The service engineer accesses the service menu by
touching the wrench symbol (22) in the third program
level.
Touchscreen settings
When you touch the question mark (19) in the lower right
corner of the touchscreen, the help screen is displayed
starting at the first level.
You can open two fly-out menus here by touching the
corresponding symbols in column (8).
In the upper fly-out menu you can switch off the clicking
tone of the touchscreen by activating the crossed-out
musical note symbol.
In the lower fly-out menu you can adjust the intensity of
the touchscreen display with the –/+ keys. During this
adjustment a reference value appears above the symbol
in column (8).
NOTE
i
To set the touchscreen intensity the system must be
switched on for at least ten minutes to ensure that the
touchscreen has reached its full brightness.
An hour-glass appears during the boot-up phase.
You cannot change the intensity level while the hour
glass is displayed.
To close a fly-out menu, touch the blue arrow at the left
end of the corresponding line or the relevant symbol in
column (8).
To return to the previous level, touch the blue arrow (9)
at the top of column (8).
T R
9
SID = 19,6”
6 x 12”
CEPH
PAN
Aufnahmebereit
1260
10
64kV
8mA
?
P1
9,0 s
Quick
TS
19
9
8