Sirona Orthophos XG Plus DS/Ceph, Руководство по эксплуатации

Страница: 83 / 128

Sirona Dental Systems GmbH 10 Cephalometric exposures (CEPH)
Operating Instructions ORTHOPHOS XG
Plus
DS/Ceph 10.5 Making the basic settings in program level 3
59 87 594 D 3352
D 3352.201.01.18.02
83
Basic settings for the entire menu
Level 2
You may also display all of the program settings and
make the settings described above in a second program
level.
To access the second program level, touch the blue
arrow (9) in the upper right corner of the touchscreen;
the arrow will point upward then.
After having made your selections, you can return to pro-
gram level 1 only by touching the blue arrow (9) once
again.
NOTE
i
When you confirm the exposure with the R button, the
program settings changed in these submenu lines will
automatically be reset to the default settings.
10.5
Making the basic settings in program level 3
To access the third program level, touch the down arrow
(20) in the second program level.
Programming the patient symbols
You may enter new kV/mA values for the preselected
exposure program and for the respective preselected
patient symbol in the center area.
Programming is done by touching the memory symbol
(1).
10.6
Changing the startup settings in program level 4
You can access program level 3 by touching the disk icon
(21) in level 4.
In level 4 you can modify any factory-programmed
startup parameters.
They are then displayed after switching on the system
and for each new exposure.
You can only change the patient icon preference (2nd
icon from the left, as per factory setting).
Programming is done by touching the memory symbol
(1).
8mA
?
8mA
?
60kV
9mA
60kV
9mA
CEPH CEPH
Quick
ON
Quick
OFF
9,4s
9
20
73kV
15mA
?
C3
C3
73kV
15mA
CEPH CEPH
Select basic settings Select basic settings
1
2 1
CEPH CEPH
Select Start Settings
1