63 76 482 D 3572
6
D 3572
.
031.01.04
.
02 12.2015
1 General data
Sirona Dental Systems GmbH
1.1 Intended use
Installation Instructions Facescan
1
General data
1.1
Intended use
The Facescan extension is intended for use as follows:
● The Facescan extension equips the GALILEOS with a 3D surface
scanner so that you can capture the surface of the patient's face in
color, either in addition to 3D X-ray volume imaging or without using
this technique at all (and, therefore, without any exposure to
radiation). The 3D surface scanner is used to generate a surface
model of the patient's head.
Application:
Patient marketing/communication:
The surface model that is generated can be used to explain medical
issues and possible treatment options to the patient.
The Instructions for Use and the Inspection and Maintenance Instructions
of the GALILEOS and the Facescan must be followed.
1.2
System requirements
SIDEXIS and GALILEOS version
● GALILEOS firmware from complete unit software V04.12
● SIDEXIS XG from version 2.5.6
● SIDEXIS 4 in version 4.1.1 and higher
● GALILEOS software from version 2.00
Hardware requirements
Note the GALILEOS and SIDEXIS installation requirements.
CAUTION
Potential errors in medical treatment
The Facescan extension must not be used for diagnosis, treatment or
planning medical treatment.
CAUTION
Undesirable radiation
Combining an X-ray exposure with a Facescan exposure is not
permitted unless there is a justifying indication for this. This is because
of the exposure to radiation that accompanies this procedure.
If an X-ray exposure is being used in combination with a Facescan
exposure, but the surface exposure process fails, the patient must not
be X-rayed again.
