Simrad ES60 - DATASHEET REV A, Руководство по установке

Страница: 79 / 162

Cable layout
12-16/60 transducer
This is the termination of the transducer cable from the 12–16/60
single or dual beam transducer to the transducer socket on the
General Purpose Transceiver Unit (GPT). The other end of the
cable is permanently fi xed to the transducer.
Note
Always check the transmit power if wide beam is selected in
order not to exceed the power capacity on the transducer.
M
E
F
J
H
D
C
K
L
A
B
N
GPT Transducer
socket
W802-10
Rev.A
12-16/60 Transducer cable termination
Transducer
cable
Junction Box (1:1)
(Optional)
Brown
Yellow
Blue
Black
Screen Connect to plug housing
Transducer
cable
Configuration WIDE
Configuration NARROW
C
D
Junction Box (1:1)
(Optional)
Brown
Yellow
Blue
Black
Screen Connect to plug housing
C
D
If you need to splice the transducer cable, it is very important to
use the correct cable, and to avoid ground loops. We strongly
recommend the use of a junction box. We also recommend that
you install the transducer cable in a steel conduit.
Related topics
Cable splicing
on page 140
Steel conduit
on page 140
GPT Transducer plug connection
on page 105
304699/A
77